EPEVER SOLAR Demand CONTROLLER Set up: TRACER AN Sequence CONTROLLE
EPEVER SOLAR Demand CONTROLLER Set up: TRACER AN Sequence CONTROLLE
Blog Article
The EPEVER Tracer AN Sequence Photo voltaic Charge Controller is usually a hugely economical solar controller made for off-grid photo voltaic systems. Determined by multiphase synchronous rectification technologies, it guarantees optimized Power conversion and program balance for a wide range of photovoltaic (PV) purposes.
Vital Features in the EPEVER Tracer AN Sequence Controller
The Tracer AN sequence makes use of EPEVER Solar Charge Controller technological innovation for exceptional photo voltaic energy harvesting. Important capabilities include:
Multiphase Synchronous Rectification (MSR) for improved Vitality conversion.
Sophisticated MPPT Algorithm with >ninety nine% effectiveness.
Dual-Stage Charging for Increased battery lifetime.
LCD Display with genuine-time information monitoring.
Multiple Load Control Modes including guide and timer.
Extensive Electronic Protections versus overcharging, in excess of-discharging, quick circuits, and reverse polarity.
Stage-by-Move Information to Creating the EPEVER Tracer AN Collection Controller
1. Unboxing and Preparing the Controller
Make certain all components are integrated: Tracer AN device, temperature sensor, interaction cables, and person guide.
Confirm the model quantity and voltage scores match your photo voltaic panel and battery specs.
2. Mounting the Demand Controller
Pick a effectively-ventilated, dry location near the battery bank.
Safe the Tracer AN controller utilizing the supplied mounting brackets.
Preserve good clearance for warmth dissipation.
3. Wiring the Photo voltaic Demand Controller
Caution: Normally observe correct safety protocols and make sure the method is run off ahead of connecting components.
Move 1: Connect the battery terminals to your charge controller (good to optimistic, negative to detrimental).
Phase two: Hook up the solar panel array on the PV input terminals.
Action 3: Hook up the load terminals if using a immediate load relationship.
Stage four: Double-Examine all connections for polarity and tightness.
4. Configuring the Controller Options
Energy about the controller by connecting the battery initial.
Make use of the Liquid crystal display Show to navigate the configurations menu.
Configure:
Battery Sort: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Management Modes: Manual, timer, mild Management.
five. Checking and Data Logging
The Tracer AN Collection supports authentic-time checking using the MT50 distant meter.
Info is usually logged by way of the RS485 conversation port applying program including Photo voltaic Station PC.
Remote checking can be done With all the EPEVER WiFi module.
six. Troubleshooting Popular Issues
Concern one: No Ability Output
Verify battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Situation two: Over-Voltage Security
Confirm the photo voltaic array’s voltage rating.
Modify technique parameters if necessary.
Concern three: No Battery Charging
Inspect PV wiring for continuity.
Validate MPPT configurations from the menu.
Advantages of the Tracer AN Series with MSR Technologies
The multiphase synchronous rectification engineering assures:
Better More info Performance: Lessened Electrical power losses during conversion.
Enhanced Trustworthiness: Stable overall performance below variable loads.
Lengthier Battery Daily life: Regular and precise charging profiles.
Conclusion
The EPEVER Solar Charge Controller with multiphase synchronous rectification technologies is definitely an Extraordinary option for optimizing solar energy era and lengthening battery existence. By following the above set up guideline, buyers can be certain most performance and program longevity.