EPEVER SOLAR CHARGE CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
EPEVER SOLAR CHARGE CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
Blog Article
The EPEVER Tracer AN Sequence Solar Charge Controller is really a really successful photo voltaic controller made for off-grid photo voltaic systems. Depending on multiphase synchronous rectification engineering, it assures optimized Strength conversion and technique steadiness for a variety of photovoltaic (PV) purposes.
Crucial Characteristics in the EPEVER Tracer AN Series Controller
The Tracer AN collection utilizes EPEVER Solar Demand Controller know-how for excellent solar energy harvesting. Crucial capabilities contain:
Multiphase Synchronous Rectification (MSR) for enhanced Power conversion.
Innovative MPPT Algorithm with >ninety nine% effectiveness.
Dual-Phase Charging for Increased battery lifetime.
Liquid crystal display Exhibit with real-time info monitoring.
Multiple Load Management Modes together with manual and timer.
Detailed Electronic Protections against overcharging, above-discharging, brief circuits, and reverse polarity.
Phase-by-Action Guideline to Setting Up the EPEVER Tracer AN Collection Controller
one. Unboxing and Making ready the Controller
Be certain all parts are involved: Tracer AN device, temperature sensor, conversation cables, and user handbook.
Validate the design variety and voltage ratings match your solar panel and battery technical specs.
two. Mounting the Cost Controller
Pick a nicely-ventilated, dry place close to the battery lender.
Safe the Tracer AN controller using the supplied mounting brackets.
Maintain right clearance for heat dissipation.
3. Wiring the Solar Demand Controller
Warning: Often follow correct protection protocols and make sure the technique is powered off before connecting factors.
Action 1: Connect the battery terminals to your cost controller (good to positive, detrimental to adverse).
Stage two: Hook up the photo voltaic panel array on the PV input terminals.
Move three: Link the load terminals if employing a immediate load connection.
Move 4: Double-Look at all connections for polarity and tightness.
four. Configuring the Controller Options
Energy on the controller by connecting the battery to start with.
Make use of the LCD display to navigate the settings menu.
Configure:
Battery Style: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Management Modes: Manual, timer, light-weight Management.
5. Checking and Information Logging
The Tracer AN Collection supports authentic-time monitoring using the MT50 distant meter.
Information is usually logged through the RS485 communication port working with application like Photo voltaic Station Personal computer.
Remote monitoring is possible Together with the EPEVER WiFi module.
6. Troubleshooting Prevalent Concerns
Difficulty one: No Electricity Output
Check battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Issue two: Over-Voltage Defense
Verify the photo voltaic array’s voltage ranking.
Alter procedure parameters if needed.
Issue 3: No Battery Charging
Inspect PV wiring for continuity.
Ensure MPPT options during the menu.
Benefits of Read more the Tracer AN Collection with MSR Technologies
The multiphase synchronous rectification technological know-how guarantees:
Better Efficiency: Diminished energy losses for the duration of conversion.
Increased Dependability: Secure overall performance beneath variable hundreds.
Lengthier Battery Everyday living: Steady and exact charging profiles.
Conclusion
The EPEVER Solar Cost Controller with multiphase synchronous rectification technology is surely an Remarkable choice for optimizing solar power era and extending battery existence. By pursuing the above setup information, buyers can make sure greatest performance and method longevity.